The 10 Scariest Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is important to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is large, you might think about the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a number of problems such as sliding. A sagging window in uPVC could cause issues with light, draughts and even security. It's crucial to act immediately if you realize that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need open the window so that you can access the frame. With the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, tighten the screws until they stay in position.

If you are unable to reposition the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. It is crucial to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it can be due to the mechanism of the handle getting worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close your window and do a test to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature of your home. Most often, upvc window repair window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who is competent. Based on the severity of the issue the caulking used previously might need to be removed before a fresh layer is applied. When it is time to uPVC repair, you must be careful not to over-caulk. This will make your window more difficult to clean and lower its energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens in a breeze. They can be easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It is essentially a simple process but it can be easier when you have a person to help hold the frame up.

Verify that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain manner or because of inadequate installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to provide advice.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a good way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges may also become disaligned as a result of wear, creating an opening where the sash and frame meet. If they are damaged beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, may be misaligned. Again, it may be possible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The next common cause of draughts is the window seals. These can become worn down or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen the possibility of draughts.

One of the most effective ways to reduce draughts is by using a draught excluder. These are typically made of fabric filled with some sort of filler and can be placed on the top of your windowsill. They will help block out cold air and keep your home warm and cozy!

With a little maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. It is essential to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them rather than repair them. If you have any problems with your Upvc window, it's best to consult a professional immediately.