17 Reasons To Not Avoid Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace, and they generally fit into old frames very easily. However, if you have double-pane windows that are secured by internal beading it will be more difficult to take out the old panes and put in new ones. In this situation, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you plan to try to remove the window panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional is able to come out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap between the door and the window is substantial, you may prefer an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. In time, they could be affected by a variety of issues that include sagging. A sagging window can cause problems with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are falling down.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in place.

If you can't reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. The majority of the time this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to close your window and do an experiment to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Based on the severity of the problem the caulking that was used up may require removal before a new layer of caulk can be put on. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are free of debris and upvc that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal than the frame. Again this can easily be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open in a breeze it could be the hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It is very easy to change a window hinge however it is easier if someone else helps hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of improper installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are always happy to offer assistance.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges, also because of wear and tear, can become misaligned, this will cause gaps to develop between the sash and the frame. If they are beyond repair, it may be necessary to have them realigned. Secondly the interlock, this is located on the hinge of the window, may be misaligned. Again, it's possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next common cause of draughts is the window glass repair near me seals, these are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease the risk of draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes filled with some type of filler. They can be positioned on the windowsill on top. These will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and there may come an point at which it is more economical to replace them than repair them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as possible.