10 Things Everybody Has To Say About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

Regularly cleaning and lubricating Upvc window repair windows and doors is crucial. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and typically fit into frames of the past easily. However, if you have double-pane windows that are secured by internal beading, it will be more difficult to take out the old panes and put in new ones. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you start working on the glass, so that any shards fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep water and drafts from entering your property until a professional is able to fix the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the distance between the window and the door is large, you might prefer security screens that has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to get at the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in position.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. The majority of the time it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. You'll first need to close the window and perform an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your upvc window repairs near me windows are stiff to open, or slack and open with a breeze it could be hinges at the fault. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they can wear down over time. Changing a window hinge is essentially a simple procedure, but it is easier if you have someone to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should open.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or by poor installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be pleased to offer you advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. It is recommended to do this once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges may also become disaligned as a result of wear, causing a gap between the frame and sash. If they are damaged beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could be unbalanced. This is located on the hinge's side and may need to be cleaned. In some cases, it may be necessary to replace these.

The next most common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and will reduce the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. These will help to block out cold air and keep your home warm and cozy!

With a little maintenance and repair, your upvc windows will provide excellent insulation and security for your home. However, it is important to recognize that all windows have a life span and eventually, they will reach the point when it's more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is always best to seek professional assistance immediately.